Birch/Hardwood Core Shuttering Black/Brown Film Faced Plywood/Marine Plywood

  • Birch/Hardwood Core Shuttering Black/Brown Film Faced Plywood/Marine Plywood
  • Birch/Hardwood Core Shuttering Black/Brown Film Faced Plywood/Marine Plywood
  • Shandong
  • ISO,CE
  • 1
  • $13.00-$16.00/ Sheet
  • L/C,D/P,T/T,Western Union
Send Message
More Product Details

Product Description

Size

1.Small sizes:915x2135mm,1200x1800mm,1525x1525mm 

2.Standard sizes:1200X2400mm,1220x2440mm,1250x2500mm

3.Big size:1500x3000mm

Thickness

3,6,9,12,15,16,17,18,19,20,21,25,27,30mm

F&B

brown film,Black film,red film,green film and so on

Finish

Smooth,mesh(anti-slip),with or without logo(customized logo by customers)

Core

Poplar,Hardwood,Eucalyptus,Birch,Pine,Combi and etc

Glue

WBP(PHENOLIC-boiled for 48hours,reused times 15-20/MELAMINE-boiled for 6-8hours,reused times 8-12/MR-boiled for one hour,reused times 6-8)Amount of the glue,take 1.7mm thickness veneer for example,the amount of glue used in other factory is 0.25kg/m2, and our use is 0.33kg/m2,it will ensure the high strength of plywood in application.

Formaldehyde release

E1≤1.5mg/L E2≤5.0mg/L

Hot press

one time hot pressed,two time hot pressed,(difference: two time hot pressed plywood smooth surface;one time hot press,low cost and cheap price.Choose by your market)

Cycle life

6-20 times

Tolerance

+/-0.5mm,+/-0.8mm

Grade

A,AA,AAA

MOR/MOE

MOR ≥30Mpa;MOE ≥6000Mpa 

Moisture

Less than 12%

Density

poplar:530~500kgs/cbm,hardwood:600~580kgs/cbm

Edges

Four edges will be sealed with water-proof paint(red, green or others)

Usage

Ideal concrete construction materials 

Packing

Inner packing:0.2mm thickness plastic bag 

Outer packing:pallet with carton and strpped with steel tape

 Feature:

1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed.

2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing.

3. If used abide by the illustrations strictly, it can be reused more than 30 times, so  reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould).

4. Solves the problems of leaking and rough surface during constructing process.

5. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat.

Baltic Birch - Boulter Plywood

Okoume marine plywood is Water & Boil Proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness before sanding. Okoume Rotary 

Baltic Birch Marine-Plywood 2440 x 1220mm | worldpanel

Birch plywood sanded on both sides. Our Baltic birch plywood has a wide range of applications, and is fully exterior with a WBP Glue-lineFacing is a BB/CP 

Baltic Birch Marine Plywood - Capitol City Lumber

Unfinished Marine Baltic Birch whole-piece face veneer plywood in thicknesses from 6mm or 1/4″ to 24mm or a full 1″ in six different thicknesses

Is Marine Grade Plywood the same as Baltic Birch Plywood

Dec 21, 2016 - No. Baltic Birch is a specific product. What you're looking at is not necessarily the same. I can see a few differences right offhand. Baltic Birch is 

Baltic Birch Marine Plywood Redi-Cuts - Total Wood Store

Baltic Birch Marine 24"x48" plywood sheets available in 1/4", 3/8", 1/2", 5/8", 3/4" and a full 1" thickness. This is an unfinished marine grade Baltic Birch 

1/2” Marine Grade Plywood 2' x 4' -

1/2" Marine grade unfinished plywood in either Fir or Baltic Birch. This plywood is good on one side with a BB grade front that is smooth but can have patches 

Baltic Birch vs. Marine ply :: Builders' Forum

Aug 13, 2014 - I can get quality Baltic Birch for half the price of marine ply, plus not drive about a 100 miles to get. If the birch is epoxy coated,? is it necessary 

Ultimate Guide to Baltic Birch Plywood: Why It's Better, When

May 22, 2017 - It also has a thicker face veneer than traditional cabinet grade plywood. Over the last few months, I've whittled up a healthy number of Baltic birch 

Plywood: Cabinet and Marine Grade - Johnson's Workbench

We offer a wide selection of cabinet, furniture and marine grade plywood. ... PLYBI1/4R3, 1/4" Birch Plywood

Writing a Message
  • Please Enter your Subject.
  • Please enter Your valid email address.
Your inquiry content must be between 20 to 5000 characters..